Description

Spring Hinge Pin Closer Brass. The Hinge Pin Door Closer can turn almost any door into an automatic self-closing door. All you need to do is replace the existing hinge pin with our door closer hinge pin. It takes under a couple minutes with some basic tools. Internal spring with adjustable tension swings door closed quietly & smoothly Works on interior or exterior residential or commercial doors; for doors over 30 lbs, use 2 closers Heavy-duty steel with a Satin Brass, Satin Nickel, or Oil Rubbed Finish; virtually unnoticeable once installed In order to adjust the tension, you will need to take off the cap, pull the little pin out, tighten it with the wrench, put the pin back in. Repeat until tight enough to close the door. Once the tension is set, put the cap back on. Spring Hinge Pin Closer Brass Brass For 3.5 Or 4" Hinges On Interior Doors Spring Bearing Adjustable Spring Tension Replaces Hinge Pin And Closes Door Automatically Use One For Doors Less Than 60 Lbs Or Two For Doors Over 60 Lb Mfg #893890 Please note that we are not an authorized dealer of this product and any warranty included with the product may not be honored by the manufacturer. We handle factory and retail closeouts, overstock, salvage, lost freight and store returns. No warranty or liability is expressed or implied. But I accept returns in the same condition as it was sent to you. Please be sure this is the one you need … Thank you for your purchase and any question or disagreement we are sure we can solve it ... we are starting on EBAY for this your feedback is crucial for us ... thank you.. fegaronline