Description

BRAND NEW 11" Delco power disc brake conversion kit with Slotted Rotors, Spindles, Tubular Control A-Arms The heavy duty tubular Upper and Lower A-Arms for improves Suspension geometry over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension, and they feature steel cross shafts which incorporate aluminum bushings. The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling. The bushings also have machined bevel, stainless washers, and stainless lock nuts. The upper control arms also feature powder coated gloss black machined tube ends for precision fits which are assembled with ball joints. The tubular lower control arms replace stock lower control arms. They feature a robust tubular design with gussets and cross brace, bushings with steel housings and crush tubes, and a powder coated gloss black finish. The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment. This is Designed for the Following Applications: 1964-1972 Chevy Chevelle 1970-1972 Chevy Monte Carlo 1967-1972 Chevy Malibu 1964-1972 Chevy El Camino 1964-1972 Pontiac GTO 1964-1972 Pontiac Tempest 1964-1972 Pontiac LeMans 1964-1972 Oldsmobile Cutlass This is the complete, top of the line power disc brake kit for your car, including the power booster, master cylinder, proportioning valve, and top of the line tubular a-arms, and much more! This kit includes: Stock Height Spindles Caliper Brackets Backing Plates 11" Drilled & Slotted Rotors - 5x4.75 Chevy Rotors Calipers with Brake Pads and Pins Outer Bearings Inner Bearings Seals Dust Caps 11" Delco Style Power Brake Booster Clevis (Connects Booster Rod to Your Original Pedal) Corvette Style Master Cylinder Self-Adjusting Proportioning Valve (Setup for Disc/Disc) Proportioning Valve Mounting Bracket Stainless Brake Lines (Connects the Proportioning Valve to the Master Cylinder) Braided Stainless Brake Hoses Tubular Control A-Arms (Upper and Lower) - complete with ball joints These are all high quality, brand new parts. These are the necessary essentials for any power disc disc brake conversion. Professional Installation Recommended 151 Stock Disc Brake Kit + 8813HP R&L + 1004 PV4 MC Side Bracket Kit + 5005 Low + 5005 up + GHSSLINES